Job Details

2 days ago Be among the first 25 applicants

Direct message the job poster from Alluxa, Inc

Highly skilled and detail-oriented Engineering Specialist to support Engineering and Manufacturing. This role is essential for ensuring manufacturing efficiency, conducting root cause analysis, troubleshooting process challenges, and driving continuous improvement. Supports all aspects of the thin film manufacturing process across all shifts. All duties require a commitment to safety, quality, accuracy, and execution with excellence through continuous improvement, performance, integrity, and respect for people and the Companys mission. Ideal candidates will possess the following traits/skills: excellent interpersonal skills, professionally mature and

honest in their conduct, good verbal and written communication skills, highly detail-oriented, driven to learn & improve processes, flexible/agile, reliable, and a team player.

Key Responsibilities:

• Under minimal supervision, provides technical support, training, and acts as liaison between departments during all aspects of the manufacturing process (order intake to post shipment customer support)
• Work cross-functionally to support engineering, quality, and R&D teams to drive innovation
• Evaluate coating runs, review spectral and quality results to provide timely feedback and recommend process, scanning, annealing, or mechanical adjustments
• Analyze coating machine process data and SPC charts using internal software to assess performance and suggest parameter changes
• Standardize and maintain machine configurations; collaborate with planning and engineering to align setups with production and technical needs
• Optimize machine performance using manufacturing data and analysis tools to improve coating uniformity, deposition rates, and material properties
• Review customer documents (e.g., purchase orders, quotes, drawings) and define product specifications to create accurate internal product specifications in the MES system
• Provide product disposition on standard product based on test data to assess compliance with customer specifications with minimal guidance; document and communicate disposition results and next steps in the MES
• Prepare and verify customer documentation, including source inspection records, first article inspection reports, serialization information, product performance data, and other required delivery documentation
• Perform product testing, gather results, and report data in a compliant format
• Research and gather data to address consumer concerns and complaints
• Assist in troubleshooting equipment and process issues to maintain production efficiency
• Support the development, implementation, and maintenance of technical documentation, standard operating procedures, and process controls
• Obtain certifications and/or qualifications as required to ensure compliance with industry standards and Company expectations
• Ensure compliance with industry standards, safety regulations, and environmental guidelines
• Adhere to Company quality policy, environmental policy, sustainability policy, and safety programs
• Performs other duties as assigned by supervisor/management

MINIMUM QUALIFICATIONS:

• Bachelors degree in a STEM discipline; mechanical or electrical engineering, or physics preferred OR high school diploma or equivalent PLUS 3 years of experience in thin film coating in an engineering/technical capacity in operations design, development, or manufacturing
• Strong software & computer competency, including MS Office and advanced Excel skills
• Skilled in reading, comprehending, interpreting, and executing detailed instructions, and short correspondence (e.g., e-mails, texts, instant messaging)
• Skilled in writing simple, informational, and technical correspondence
• Team oriented and driven to meet goals and improve processes
• Strong communication and collaboration skills
• Can multitask and work with a high degree of accuracy and attention to detail
• Must maintain satisfactory attendance, including timeliness

PREFERRED EXPERIENCE:

• Experience with data analysis, statistics, and experimental design, along with creation and execution of test plans, methods, and technical reporting
• Experience in thin film manufacturing and/or any manufacturing environment; experience in optical coating, metrology, disposition, cleaning, parts assembly, and fabrication
• Experience with thin film design software such as TFCalc, Optilayer, etc.
• Experience in developing Standard Operating Procedures, Job Safety/Hazard Analysis, or Work Instructions
• Hands-on experience with metrology equipment, such as but not limited to spectrophotometers, laser measurement systems, Zygo interferometers, part measurement systems, etc.
• Familiar with quality, environmental, and safety programs/standards/regulations such as ISO 9001, 14001, 45001, CAL OSHA, and clean room requirements
• Familiar with lean manufacturing methods/tools (5-s, root cause analysis, continuous improvement cycle)

WORKING CONDITIONS:

Work within a manufacturing environment; moderate temperature and noise level, occasionally elevated

Ability to remain in a seated or standing position for the duration of the scheduled shift, as required by job duties

Ability to handle delicate optical components and precision tools with fine manual control while adhering to

contamination control and handling protocols

Ability to perform overhead and elevated tasks, including ladder work, requiring physical capability to maintain

stability, reach, and control while adhering to safety standards

Be able to work in various positions, including but not limited to, reaching, stooping, standing, bending over, sitting,

kneeling, and squatting for extended periods; be able to perform highly repetitive tasks with hands while standing

or sitting for up to 10 hours

Comfortable working with solvents, cleaning agents, lasers, sharp instruments, and high-temperature equipment,

following all safety and part handling protocols

Visual acuity for close and mid-range tasks, including viewing small components and using a microscope

Required to wear a respirator, hairnet, face mask, gloves, and clean room suit when necessary

Be able to work extended hours (overtime) when required

Be able to lift, pull, and push materials and equipment to complete assigned job tasks

Must be able to lift and/or move 35 pounds of weight on occasion

The physical demands described here are representative of those that must be met by an employee to successfully

perform the essential functions of this job; reasonable accommodations may be made to enable individuals with

disabilities to perform essential functions

Alluxa is a technology company that provides specialized optical filters and thin-film precision coatings for the most challenging applications in the industrial technology, life sciences, and semiconductor markets. The companys products are developed through a proprietary coating process using state-of-the-art, advanced equipment. Alluxa partners with customers across major end markets to provide customized, complex precision coating solutions through Alluxas specialized technology platform and proprietary processes.

Alluxa is a subsidiary of Enpro, a leading industrial technology company using material science to push boundaries in semiconductor, life sciences, and other technology-enabled sectors. We are a leader in sealing technologies, advanced surface technologies, and highly engineered materials. Our products and services are sold into more than 40 distinct end-markets that touch our lives every day - from food and pharmaceutical facilities to semiconductor clean rooms, from agricultural robots that help grow your food to last-mile technologies that deliver it to your doorstep, from commercial aviation to space exploration, and much more in between. Our commitment to innovation, quality, and value has propelled our brands to wide recognition and leading positions in their markets.

Alluxa/Enpro is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status, or other characteristics protected by law.

Alluxa/EnPro carefully considers a wide range of compensation factors, including the background, education, training, and experience required, as well as geographic considerations such as cost of labor, and applicable local and state laws. These considerations can cause the offered compensation to vary. The hiring range for this position is typically $26.00/hr - $42.00/hr. The actual offer will be based on the individual candidate. Bonuses and/or incentives may be eligible for this position. Alluxa/EnPro offers a range of benefits, including, but not limited to, medical, dental, vision, life, 401(k) matching, and other supplemental insurance options.

Seniority level

• Seniority level

  Associate

Employment type

• Employment type

  Full-time

Job function

Referrals increase your chances of interviewing at Alluxa, Inc by 2x

Inferred from the description for this job

Medical insurance

Vision insurance

401(k)

Tuition assistance

Disability insurance

Get notified about new Engineering Specialist jobs in Santa Rosa, CA.

Santa Rosa, CA $75,000.00-$88,000.00 1 week ago

Rohnert Park, CA $94,600.00-$142,000.00 3 days ago

Windsor, CA $175,000.00-$185,000.00 1 week ago

Santa Rosa, CA $83,000.00-$103,000.00 2 weeks ago

Santa Rosa, CA $111,940.00-$186,570.00 2 months ago

Santa Rosa, CA $95,000.00-$125,000.00 2 weeks ago

Software Engineering Specialist - Human Data

Santa Rosa, CA $79,150.00-$118,726.00 1 week ago

Santa Rosa, CA $98,280.00-$182,520.00 1 month ago

Santa Rosa, CA $102,500.00-$153,500.00 2 days ago

Manufacturing Equipment Engineer Semiconductor Operations

Santa Rosa, CA $116,790.00-$194,650.00 1 month ago

Sebastopol, CA $80,000.00-$100,000.00 2 days ago

Santa Rosa, CA $105,000.00-$170,000.00 2 months ago

Santa Rosa, CA $80,010.00-$148,590.00 1 month ago

Santa Rosa, CA $102,500.00-$153,500.00 2 weeks ago

Were unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.